C 200-System consists of the following components:
- C 200 Measuring cell
- C 5010 Decomposition vessel
- C 248 Oxygen filling station
- Consumables for calibrations and installation
Space-saving and low cost combustion calorimeter for determing gross
calorific values of liquid and solid samples.
Validation according to DIN 51900,ISO 1928, ASTM D240, ASTM D4809, ASTM
D5865, ASTM D1989, ASTM D5468, ASTM E711.
Suitable for teaching and training, as well (f.e tecnical- schools,
universities) and for industriell laboratories with less analyses..
Manual handling for water and oxygen filling.
Four different working methods, isoperibolic, dynamic, manual, time
controlled makes possible an ideal adjustment of different operating
tasks.
Clear and easily explained display which is simply to use .
With an external power pack, "world tension useable" from 100 - 240 V
AC, 50/60 Hz. The operating voltage of the calorimeter is 24 V DC low-
voltage.
Friendly in aftersales
Manual ( teaching mode): ignition and end of the measurement will be
done by the operator himself; the temperature increase will be indicated at the
display each minute.
All calculations have to be done manually.
At the other three modes ignition and calculation of the gross calorific
value will be done automatically.
The gross calorific value will be shown on the display. Acid corrections
and calculations of the net calorific value have to be done manually.
The modes have different measuring times:
Isoperibolic: approx: 17 min.
Dynamic : approx. 8 min Manual : approx. 17 min (depend on the operator)
Time controlled : 14 min
The decomposition vessel can be equiped in to use an combustible
crucibles C 14 (accessory C 5010.4 attachment is neessary)
User-friendly software C 5040 Calwin for controlling the calorimeter
and administration of measuring data (asseccory). Transfer of the datas to Excel
or Word are possible Up to eight IKA measuring cells can be controlled by a
single PC, using a multiserial plug in card PCI 8.2 (accessory)